Wire cable terminal With fork
Wire cable barrel terminal sst A4 fork welded
FRK-BARLTRML-WELDED-A4-D10
Register now and access more than 125,000 products
- Design: Welded
- These products have not been developed and manufactured as slings or load-bearing equipment
- Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC
- To compress wire rope terminals with a rope diameter of 2 to 6 mm, hydraulic manual crimping pliers must be used as well as the compatible crimping jaws
- Wire ropes with a diameter of 8, 10 and 12 mm cannot be compressed by hand. The use of stationary presses and/or rollers is required here
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Suitable for rope diameter | 10 mm |
Outer diameter (d2) | 18 mm |
Bolt diameter (d3) | 19 mm |
Length (l1) | 150 mm |
Fork width (inner) (l3) | 20 mm |
Fork width (outer) | 32 mm |
Fork height (h1) | 30 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Hexagonal bolt with shank
Article sticker
Flat square For LFK cable routing conduit
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Screw with flattened half round head and collar with hexagon socket
Nozzle For PNG 122/HNG 28
Washer, large external diameter
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain