Wire cable terminal With fork
Wire cable barrel terminal sst A4 fork welded
FRK-BARLTRML-WELDED-A4-D3
Register now and access more than 125,000 products
- Design: Welded
- These products have not been developed and manufactured as slings or load-bearing equipment
- Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC
- To compress wire rope terminals with a rope diameter of 2 to 6 mm, hydraulic manual crimping pliers must be used as well as the compatible crimping jaws
- Wire ropes with a diameter of 8, 10 and 12 mm cannot be compressed by hand. The use of stationary presses and/or rollers is required here
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Suitable for rope diameter | 3 mm |
Outer diameter (d2) | 6.5 mm |
Bolt diameter (d3) | 6 mm |
Length (l1) | 65 mm |
Fork width (inner) (l3) | 7.5 mm |
Fork width (outer) | 13.5 mm |
Fork height (h1) | 10 mm |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Countersunk screw with hexagon socket head ISO 10642, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)
Ballast weight
SC short twist drill bit DIN 6539
Box-end plug-in torque wrench head drive Stahlwille 732/100
Asphalt screw anchor pipe reducer
Base height adjuster, type B Screw-on
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
