Wire cable terminal With fork
Wire cable barrel terminal sst A4 fork welded
FRK-BARLTRML-WELDED-A4-D6
Register now and access more than 125,000 products
- Design: Welded
- These products have not been developed and manufactured as slings or load-bearing equipment
- Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC
- To compress wire rope terminals with a rope diameter of 2 to 6 mm, hydraulic manual crimping pliers must be used as well as the compatible crimping jaws
- Wire ropes with a diameter of 8, 10 and 12 mm cannot be compressed by hand. The use of stationary presses and/or rollers is required here
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Suitable for rope diameter | 6 mm |
Outer diameter (d2) | 12.5 mm |
Bolt diameter (d3) | 12 mm |
Length (l1) | 106 mm |
Fork width (inner) (l3) | 14 mm |
Fork width (outer) | 24 mm |
Fork height (h1) | 20 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Bit holder E 6.3 (1/4 inch) With stainless steel sleeve and snap ring
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
EPS profile double cylinder
Low-cut safety shoes, S3
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Washer For reduced shank screw in hygienic design
System adapter plate
Thread cutting tool set HSS M3-M12 44 pcs in system case 8.4.1
Brake adjustment lever For VW Group