Wire rope clamp DIN 741, zinc-plated steel
DIN 741 steel zinc plated
CBLCLMP-DIN741-(A2K)-D1/8-3,0
Register now and access more than 125,000 products
Due to the withdrawal without replacement of the DIN 741 wire rope clamp, it is recommended that wire rope clamp DIN EN 13411-5 is used. From M5 the cable clamp is available as DIN EN 13411-5. For this, see art. no. 052005/0520065/052008/0520010/0520013/0520016/0520019/0520022/0520026/0520030
Datasheets(X)
CAD data (available after login)
Wire rope clamps for cable end connections with minor requirements. For safety requirements, wire rope clamps in accordance with DIN EN 13411-5 must be used.
The clamping jaw must always be attached to the loaded part of the rope. Where a thimble is used in the loop design, the first wire rope clamp should be attached directly to the thimble. The distance between the wire rope clamps should be at least one wire rope clamp t. Whereby t is the width of the clamping jaw.
 | |
Standards | DIN 741 |
Material | Steel |
Surface | Zinc plated |
Suitable for rope diameter (d) | 3.0 mm |
Grip width (t) | 10 mm |
Thread type x nominal diameter (d1) | M4 |
Height (h1) | 20 mm |
Internal diameter (d3) | 3 mm |
Width (b1) | 21 mm |
RoHS-compliant | Yes |
Last viewed
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Small abrasive mop Klingspor KM 613
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Work coat
TX bit
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagonal bolt with thread up to the head
Type SKD coupling sleeve With hexagon socket and flange
Professional finish set 48 pieces