Wire rope clamp DIN 741, zinc-plated steel
DIN 741 steel zinc plated
CBLCLMP-DIN741-(A2K)-D3/8-10,0
Register now and access more than 125,000 products
Due to the withdrawal without replacement of the DIN 741 wire rope clamp, it is recommended that wire rope clamp DIN EN 13411-5 is used. From M5 the cable clamp is available as DIN EN 13411-5. For this, see art. no. 052005/0520065/052008/0520010/0520013/0520016/0520019/0520022/0520026/0520030
Datasheets(X)
CAD data (available after login)
Wire rope clamps for cable end connections with minor requirements. For safety requirements, wire rope clamps in accordance with DIN EN 13411-5 must be used.
The clamping jaw must always be attached to the loaded part of the rope. Where a thimble is used in the loop design, the first wire rope clamp should be attached directly to the thimble. The distance between the wire rope clamps should be at least one wire rope clamp t. Whereby t is the width of the clamping jaw.
 | |
Standards | DIN 741 |
Material | Steel |
Surface | Zinc plated |
Suitable for rope diameter (d) | 10.0 mm |
Grip width (t) | 18 mm |
Thread type x nominal diameter (d1) | M8 |
Height (h1) | 42 mm |
Width (b1) | 34 mm |
RoHS-compliant | Yes |
Last viewed
Earthing cable
Hexagon nut with clamping piece (non-metal insert) fine thread ISO 10512, steel 10, zinc-plated, blue passivated (A2K)
Safety shoe S1P Jalas 7118
Twist drill bit assortment HSCo DIN 338 Type RN MFD VARIO 25 pieces
1/2 inch impact socket wrench insert hexagon, metric, short
pias® drilling screw, raised countersunk head with AW drive
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Lamella flap disc Flexi-Disc
Additional print costs for NPH Clipster