Welcome to Würth Aerospace Solutions For trade customers only

Wood decking oil

Wood terrace oil
WOOILCARE-TERRAC-TEAK-2,5LTR

Art.-no. 0890997301
EAN 4047376938762
Prices for customers after login
Wood decking oil

Art.-no. 0890997301

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For protecting and freshening up wood for outdoor use

Penetrates deep into the wood


  • Reliable protection against ingress of moisture

  • Increases durability of the wood

  • Keeps wood elastic

  • Less susceptible to cracking


UV protection due to colour pigmentation


  • Slows down greying of wood

  • Extends painting intervals

  • Natural wood colour is maintained over the long term


Contains high-quality substances


Surface is water- and dirt-repellent



Odourless when dry



Permeable

Notice

Do not use on hot surfaces or in direct sunlight. The surface must be dry. Oil-soaked cloths can ignite spontaneously and must be disposed of in a tightly sealed container following use.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

High-quality care oil for protecting and freshening-up high-quality woods such as teak, bangkirai, spruce, pine, larch and oak, for wooden terraces, wooden decking, garden furniture, fences and car ports for outdoor use.

Instructions

Clean wood thoroughly (mixture 1:2, cleaner:water) with wood terrace cleaner and revive with timber reviver A and B. The wood must be completely dry before application of decking oil. Stir oil well prior to application and apply with a brush. Consumption: approx. 10-13 m2/l. We recommend also stirring the oil at regular intervals during application. Following application, allow the oil to soak into the wood for approx. 20 minutes. Wipe off excess oil with a cotton cloth. Protect the surface from moisture for 24–48 hours.

Contents

2.5 l

Product weight (per item)

2583 g

Chemical basis

Alkyd resin

Smell/fragrance

Odourless

Colour

Teak

Density/conditions

0.82 g/cm³ / at 20°C

Min./max. application quantity in volume/area

0.1-0.13 l/m²

Min. application time

20 min

Shelf life from production/conditions

60 Month / at 20°C

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Large flat paintbrush Professional

WBRSH-GLACE-MIX-SZ04

For water-based lacquer and paint systems
x 1 pcs
Softex cleaning cloth

CLNCLTH-SOFTEX-29X38CM-500SHEET

Reusable all-round textile wiping cloth is suitable for wet and dry wiping processes
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 4
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 5
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information