Welcome to Würth Aerospace Solutions For trade customers only
XS30N lift - SCISLFT-3,0T-XS30N

XS30N lift

Short stroke scissor lift 3.0 t Rotary XS30N
SCISLFT-3,0T-XS30N

Art.-no. 9501014428

EAN 4057612751611

All versions

Individual price display after login
XS30N lift

Art.-no. 9501014428

Individual price display after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

3.0 t electro-hydraulic short-stroke scissor lift
  • Improved stability due to double hydraulic system and two torsion shafts

  • Limit switch as standard ensures foot protection without foot guards and underfloor installation

  • Versatile pick-up system with ramps that can be folded out on both sides and locked in place with a handle, providing a total pick-up length of 2,150 mm

  • Fully installed and, once the hydraulics are connected, ready for use without additional installation work

  • Ramps with plastic rollers enable rolling with minimal friction and minimal damage to workshop floors

  • Fold-out, lockable platform extensions on both sides

  • Two independent hydraulic circuits with a total of four lifting cylinders eliminate the need for additional safety latches

  • Can be set up on any paved surface without foundation work, and can be anchored to the ground but this is not required. The mobile kit supplied as standard enables easy movement around the workshop

  • Low drive-over height makes it easier to pick up vehicles with low ground clearance


Scope of delivery


  • 1x fully pre-assembled lifting unit

  • Control panel

  • Mobile kit

  • 5 m control cable (without plug)

  • 4x rubber supports 40 mm
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Load capacity

3000 kg

Drive for lifting platform

Electro-hydraulic

Lift height

1000 mm

Number of control units

1 PCS

Over-ground

Yes

Compensation equipment

Electronic

Type of vehicle

Passenger car

Nominal voltage

400 V

Colour

Light grey

Service components
Category Services Art. no.
Service Forklift delivery of column lift 5996 001 230
Service Installation/instruction incl. material and 4.5 t lifting device 5996 001 392
Service Column lift disassembly 5996 001 232
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Handling
Handling

FREIGHT-W.FORKLIFT-SCISSOR-LIFT

x 1 pcs
Handling
Handling

MNTG/INSTR-INCL.MAT

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Handling
Handling

DISASSEMBLY-SCISSOR-LIFT

x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details