Y-shaped angled push-in fitting with male and female thread
Y-shaped push-in fitting 90° male/fem. M/G thread
PSHINFITT-Y-90°-PLA-ET/IT-G1/4-PIP-8
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic / metal |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Design | 360° rotatable |
Form | 90° offset |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Max. operating temperature | 80 °C |
Thread type x nominal diameter (d1) | G1/4 |
Thread type 2 x nominal diameter 2 (d2) | G1/4 |
Suitable for hose external diameter (Fs) | 8 mm |
Length (l1) | 36.5 mm |
Thread length (lg) | 8 mm |
Thread length 2 (lg2) | 11 mm |
Outer diameter (d3) | 14.4 mm |
Length 2 (l2) | 28.5 mm |
Length 3 (l3) | 18 mm |
Width across flats (s1) | 17 mm |
Last viewed
Hexagon nut with fine thread DIN 934, steel I10I, zinc-nickel (P3E)
Double-ended socket wrench assortment, 14 pieces
1/2-inch socket wrench insert, TX head For external TX screws, short
Lock washer DIN 7980, A2 stainless steel, plain, for cylinder head screw
Mounting rail holder
Safety shoe S3
Stud with threaded end ≈ 2d
Work dungarees
Vulcanised fibre disc Klingspor CS 561
Cordless screwdriver AS 4