Zinc cleaner

Name: Zinc cleaner
Brand: Würth
SKU: 0893460100

Zinc cleaner
METCLNR-ZINK-1LTR

Art.-no. 0893460100

EAN 4047376598577

All versions

Similar products

Prices for customers after login

Zinc cleaner

Art.-no. 0893460100

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Ammoniacal wetting agent cleaner for galvanised surfaces

Particularly for cleaning and degreasing fresh galvanised surfaces

Prevents adhesion problems

Paint adheres even better thanks to top coat activation

Wide range of uses, suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces

Notice

For coating galvanised surfaces, only use tempering materials specially recommended for galvanised surfaces. Alkyd resin-based coating materials are generally unsuitable.

Würth zinc cleaner is suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Zinc cleaner is suitable for preparing hot-dip galvanised, spray-galvanised and electrolytically galvanised surfaces. Galvanised and freshly galvanised surfaces.

Instructions

Mix 1:1 with water. Spray galvanised surfaces and wet-sand with sanding fleece. Allow the resulting metallic grey suspension to soak in for 10 minutes and then sand again. Then wash off thoroughly with water.

Contents	1 l
Container	Round bottle
Smell/fragrance	Characteristic
Colour	Transparent
Chemical basis	Ammoniacal surfactant
Shelf life from production	36 Month
Density/conditions	0.999 g/cm³ / at 20°C
AOX-free	Yes

Required accessory:

Product

Description

Quantity

Price
/PU

Nylon abrasive grit 100 Coarse A

SNDFLC-ROLL-5M-A100-35

Art.-no. 0585835100

Pre-treatment for painting galvanised steel

x 1 pcs

Nylon abrasive Fine A

SNDFLC-ROLL-5M-A180-35

Art.-no. 0585835180

Pre-treatment for painting galvanised steel

x 1 pcs

Nylon abrasive Ultra-Fine S

SNDFLC-ROLL-5M-S1000-35

Art.-no. 0585835600

Highly flexible nylon hand sanding fleece for cleaning surfaces (derusting) and matting new parts, old paint and aluminium. For optimum use in critical areas like folds, corners, recesses or other sharp corners and edges and on interior body parts

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Household glove

Description:

Permeation level: 6

Liquid-proof, premium-quality cleaning glove made from natural latex

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove made from chloroprene and latex

Description:

Permeation level: 6

Cotton flocking on the inside

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Chemical protective glove made from natural latex and chloroprene

Description:

Permeation level: 6

Cotton flocking on the inside

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.