Welcome to Würth Aerospace Solutions For trade customers only
Zinc phosphate primer 1C aqua primer - PRIM-1C-AQUA-3KG Zinc phosphate primer 1C aqua primer - PRIM-1C-AQUA-3KG
Zinc phosphate primer 1C aqua primer - PRIM-1C-AQUA-3KG - 1
Zinc phosphate primer 1C aqua primer - PRIM-1C-AQUA-3KG - 2

Zinc phosphate primer 1C aqua primer

Zinc phosphate primer 1C aqua primer
PRIM-1C-AQUA-3KG

Art.-no. 5866107103
EAN 4047376455207
All versions

Prices for customers after login
Zinc phosphate primer 1C aqua primer

Art.-no. 5866107103

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Zinc phosphate primer that can be diluted with water for iron, steel, zinc and aluminium

Low solvent content



High level of corrosion protection



Excellent chemical and mechanical resistance



Outstanding adhesion



Maximum permissible VOC content:


  • 140 g/l of product category 1 (i) ChemVOC FarbV and 540 g/l of product category 2 (c) ChemVOC FarbV

  • Max. VOC content: 540 g/l


Solids content of base material in %: 51.9

Notice

Important: Only enter the colour code (e.g. FC 0002). The surface must have the correct pre-treatment depending on the surface

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

As an anti-corrosion primer and intermediate coating on steel, cast metal and sheet metal, e.g. vehicle frames, metal construction, bridge structures, metal tanks etc. Painted surfaces Bare sheet steel Filled surfaces Cannot be coated with polyester fillers Can be worked with PU sealing compounds such as Bond+Seal Can be painted with all water- and solvent-based 1-component and 2-component top coats. Not suitable for powder coatings (temperatures too high) Available colours: FC 0002 = beige

Instructions

Diluting adjustment depending on coat thickness 2-7 % water Brush, roller or paint spray gun, nozzle size at least 1.4 mm

Weight of content

3 kg

Chemical basis

Acrylic-polyester hybrid

Available colours

FC 0002

Colour

Beige

Drying time

25 min

Conditions for drying time

at 20°C

Density

1.219 g/cm³

Density conditions

at 20°C

VOC concentration (CH)

128.4 g/l

Min. processing temperature

10 °C

Min. proportion of solids

53 %

Max. VOC concentration

540 g/l

Shelf life from production

24 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 3
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 4
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details