clamping screws Open construction, with welded ends
DIN 1480 Steel blank with weld-on ends
TURNBCKL-WELDONEND-DIN1480-M12
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M12 |
Turnbuckle-sleeve length (l) | 125 mm |
Turnbuckle-sleeve width (external) | 34 mm |
Outer diameter of sleeve end | 231 mm |
Turnbuckle-sleeve diameter | 11 mm |
Length (of welding end) | 150 mm |
Thread length (metric thread) | 75 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
WÜTOX CSMR steel zinc plated PT cs milling head TX
Neon high-visibility jacket, 3-in-1, class 3
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)
Mobile charging station Juice Booster II
Joist hanger 2.0 mm 2 pieces
Flap hinge, rounded leaves
Sidewall made from solid sheet metal
Hexagon Socket Head Cap Screw
Plastic blind rivet Type 2
Tungsten carbide bur with INOX teeth