clamping screws Open construction, with welded ends
DIN 1480 Steel blank with weld-on ends
TURNBCKL-WELDONEND-DIN1480-M30
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M30 |
Turnbuckle-sleeve length (l) | 255 mm |
Turnbuckle-sleeve width (external) | 74 mm |
Outer diameter of sleeve end | 45 mm |
Turnbuckle-sleeve diameter | 34 mm |
Length (of welding end) | 260 mm |
Thread length (metric thread) | 160 mm |
Standards | DIN 1480 |
Form | Open |
Design | With welding ends |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Circlip DIN 471
Work dungarees
Stud with threaded end ≈ 1.25 d for pressure container construction DIN 939, A4/70 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, brass, plain
Wall rail For cream and soap dispenser system
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Sweat band Sundström R06-4007
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A2-70 stainless steel, plain, with nut ISO 4032