pias® drilling screw, hexagon head with long drill tip
pias steel zinc-plated with long drill tip
SCR-DBITL-WS8-(A3K)-5,5X38
ZEBRA PIAS
Register now and access more than 125,000 products
Reduction of the assembly time by the drill tip by min. 50%:
- Drilling without graining
- Thread moulding
- Securing
all in one operation
Suitable for component combinations t I / t II according to approval ETA-10/0184
- Steel / steel
And additionally for the fixing of latches on steel substructures (bolt connections)
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected. For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
CAD data (available after login)
 | |
Standards | CS |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | UNC |
Shape of tip | Drilling tip |
Underground | Steel |
Nominal diameter (d1) | 5.5 mm |
Length (l1) | 38 mm |
Head diameter (dk) | 10.9 mm |
Head height (k1) | 5.15 mm |
Drill tip length (lp) | 14 mm |
Screw-thread length with drill tip | 35 mm |
External drive (s1) | WS8 |
Max. material thickness to be drilled through (metal) | 13.5 mm |
For max. substructure thickness | 12 mm |
Min. recommended substructure thickness | 2 mm |
Min./max. attachment thickness | 2.0-21.0 mm |
Approval | ETA-10/0184 |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |
Last viewed
Hexagon nut with clamping piece (all-metal)
Angled locking plate With plastic insert
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Measuring coupling
Hot-melt edge adhesive pellets
Spiral clamping pin, heavy-duty design ISO 8748 steel plain
Car zinc adhesive weight From the original equipment for VW, Opel and Volvo
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Countersunk screw with hexalobular head
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain