pias<SUP>®</SUP> drilling screw, raised countersunk head with H recessed head - SCR-DBIT-RSDCS-H2-(A3K)-3,5X13

pias<SUP>®</SUP> drilling screw, raised countersunk head with H recessed head - SCR-DBIT-RSDCS-H2-(A3K)-3,5X13 - 1

pias<SUP>®</SUP> drilling screw, raised countersunk head with H recessed head - SCR-DBIT-RSDCS-H2-(A3K)-3,5X13 - 2

pias^® drilling screw, raised countersunk head with H recessed head

Name: pias ® drilling screw, raised countersunk head with H recessed head
Brand: Würth
SKU: 021335 13

pias W-213 steel zinc plated raised counters. head
SCR-DBIT-RSDCS-H2-(A3K)-3,5X13
ZEBRA PIAS

Art.-no. 021335 13

EAN 4011231271707

All versions

Specification

Galvanised steel, blue passivated (A3K), raised countersunk head with Phillips head

Drilling, threading, screwing-in — all in one work step

Therefore considerably reduced time and effort

Exact drilling diameter for each screw connection

Resulting in minimisation of thread tolerance

Always an optimum connection

Prevents installation errors

Notice

Contact pressure during use approx. 100 N, screw in with depth stop if necessary

Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)

The use of impact screwdrivers is not permitted

Drilling screws must be attached perpendicular to the surface of the component

Galvanized drilling screws may only be used where dampness is not to be expected. For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Technical information


Material	Steel
Surface	Zinc plated
Nominal diameter (d₁)	3.5 mm
Length (l₁)	13 mm
Head diameter (d_k)	6.8 mm
Head height (k₁)	3.3 mm
Drill tip length (l_p)	3.0 mm
Other standard	Company standard
Head type	Raised countersunk head
Internal drive	H2
Thread type	Self-tapping screw thread
Thread design	Full thread
Shape of tip	Drilling tip
Min. recommended substructure thickness	1.5 mm
Max. material thickness to be drilled through (metal)	2.5 mm
Min./max. recommended installation speed (idling)	1700-2500 rpm
RoHS-compliant	Yes