pias self-drilling screw, countersunk head with AW recess
SCR-DBIT-CS-AW10-(A3K)-3,5X16
Art.-no. 020573516
EAN 4038898569664
Register now and access more than 125,000 products
- Drilling, thread forming and screwing in one step, saving significant time and effort
- Ensures an exact drill hole diameter for each screw connection, minimises the thread tolerance and therefore ensures an optimum connection at all times
- Prevents mistakes in the installation
- AW recess system for better torque transmission, a longer service life and optimal centring
- Contact pressure during use approx. 100 N, screw in with depth stop if necessary.
- Self-drilling screws must be installed with a suitable drill/driver (e.g. cordless drill/driver with depth stop).
- The use of impact drivers is not permitted.
- Self-drilling screws must be screwed in perpendicular to the surface of the component.
Zinc plated self-drilling screws must only be used in locations where permanently damp conditions are not expected - condensation is not considered a permanently damp condition (corrosivity category ≤ C2 in accordance with DIN EN ISO 12944-2). For fasteners with technical approval, the approval, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
Last viewed
Drawer divider set BASIC, 12-compartment
Guide rail For roller shutter systems, vertical installation box with 50 mm slats
Identification rings, PVC
Screw-on cable tie mount TM PA
Clamping bolt for perforated table for quick-action clamps
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, zinc plated 10.9 steel with thick-layer passivation (VZD)
Fastening set for outdoor cantilever rack
Precision wood twist drill bit LONGLIFE & SPEED
F8 Nova Pro Scale internal panel for H90 and H186 internal drawers
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with seal