pias<SUP>®</SUP> wing-type drilling screw, flat countersunk milling head with AW drive - SCR-DBIT-WNG-PLTCS-CUT-AW30-RUS-6,3X80

pias<SUP>®</SUP> wing-type drilling screw, flat countersunk milling head with AW drive - SCR-DBIT-WNG-PLTCS-CUT-AW30-RUS-6,3X80 - 1

pias<SUP>®</SUP> wing-type drilling screw, flat countersunk milling head with AW drive - SCR-DBIT-WNG-PLTCS-CUT-AW30-RUS-6,3X80 - 2

pias<SUP>®</SUP> wing-type drilling screw, flat countersunk milling head with AW drive - SCR-DBIT-WNG-PLTCS-CUT-AW30-RUS-6,3X80 - 3

pias^® wing-type drilling screw, flat countersunk milling head with AW drive

Name: pias ® wing-type drilling screw, flat countersunk milling head with AW drive
Brand: Würth
SKU: 021906380

Wing-pias steel flake zinc milling plate CS hd AW
SCR-DBIT-WNG-PLTCS-CUT-AW30-RUS-6,3X80
ZEBRA PIAS

Art.-no. 021906380

EAN 4038898045953

All versions

Similar products

Prices for customers after login

pias^® wing-type drilling screw, flat countersunk milling head with AW drive

Art.-no. 021906380

Prices for customers after login

Quantity

x 250 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Steel, Ruspert^®-coated (grey), AW drive. The self-drilling screw with up to 50% time saving when fastening wood to metal sub-structures

Corrosion protection

Approx. 500 hrs. no base metal corrosion in accordance with DIN EN ISO 9227 — NSS

AW drive system

Enhanced torque transmission

Longer life

Optimum centring

Better mounting output thanks to fatigue-free screwing in; the required contact pressure for transmission of the torques is considerably lower

Largest possible contact surface of bit in screw drive

Even force distribution prevents damage to the surface-protection coating and therefore ensures better resistance to corrosion

Notice

Wing-pias screws must be appropriately tested for usability for each application case. Only install using application tools with a depth stop and claw coupling.

The maximum attachment length is calculated as follows: Wood thickness and surface thickness l_U = max. attachment thickness l_B

Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)

The use of impact screwdrivers is not permitted

Drilling screws must be attached perpendicular to the surface of the component

Drilling screws may only be used where dampness is not to be expected.

For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

For use with hard and soft woods

Instructions

Force feeding of the screw is prevented by the wings drilling out the wood

The core hole is drilled into the substructure. The wings break off upon contact with the metal

The first few turns of the screw cut the thread, the remainder of the screw then screws into the thread


Nominal diameter (d)	6.3 mm
Length (l)	80 mm
Head diameter (d_k)	20 mm
Drill tip length (l_p)	13 mm
Other standard	Company standard
Material	Steel
Surface	Flake zinc grey
Head type	Disc countersunk head with milling ribs
Internal drive	AW30
Thread type	Self-tapping screw thread
Min. recommended substructure thickness	2 mm
Max. material thickness to be drilled through (metal) (l_U)	6 mm
Max. attachment thickness (l_B)	58 mm
Min./max. recommended installation speed (idling)	800-1200 rpm
RoHS-compliant	Yes

Additional accessory:

Product

Description

Quantity

Price
/PU

AW® bit

BIT-AW30-LUMINOUSYELLOW-1/4IN-L50MM

Art.-no. 06145230

E 6.3 (1/4")

x 5 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).