wSafe® 4000 pneumatic safety coupling With female thread
Safety coupling wSafe 4000 with female thread
CUPL-QCKACTION-PN-S4000-IT-1/2IN
WSAFE
Register now and access more than 125,000 products
Optimal compressed air supply and power delivery for compressed air consumers
Flow-optimised valve facilitates high flow rate of up to 4,000 l/min and a maximum operating pressure of 16 bar. This results in greater productivity and lower energy costs for the user.
High protection and corrosion resistance even under demanding conditions
Exposed surfaces are chrome-plated, nickel-plated or galvanised.
Long service life
Locking sleeve made from hardened steel
Secure, one-handed decoupling
Safety coupling with single-stage decoupling process facilitates one-handed decoupling by pulling back the locking sleeve. The coupling vents automatically with repelling of the hose prevented.
Coupling is compatible with other compressed air fittings
Series 4000 fittings comply with the European standard and have a nominal width of 10.4 mm.
Datasheets(X)
Connection thread | IT G 1/2 inch |
Length (L) | 67 mm |
Outer diameter (D) | 29 mm |
Width across flats (SW) | 25 mm |
Flow capacity | 4000 l/min |
Min./max. temperature resistance | -20 to 100 °C |
Last viewed
Cylindrical pin, unhardened ISO 2338 A1 stainless steel (m6)
Hexagonal bolt
Intermediate anchor point load concrete
ASSY® 4 A2 CS fittings screw A2 stainless steel plain full thread countersunk head
Retaining pin For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Atlantis S3 safety boots
Stretch X trousers
Butt connector for LFKS sheet steel cable routing conduit
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring