ABS Lock III HW
Anchor point ABS Lock III HW
LOCK-III-WOOD-(L3-HW-500-300)-BY-SCREW
Register now and access more than 125,000 products
When secured through a load-bearing beam, the ABS-Lock III-HW securing device is prepared for load in any direction:
- Mounted on the floor or overhead
- Axial and transverse load
- Single anchor point
- System support in safety harness systems
When attached to wooden substrates, the fall arrester solution provides simultaneous anchoring support for up to 3 people.
- The stainless steel anchor point has a post diameter of 16 mm
With or without projection
Datasheets(X)
- for load-bearing wooden constructions
- Beam min. 100 mm x 120 mm
- incl. fastening material
After pre-drilling, it is screwed through the beam and secured with a nut. The required fastening material is included.
Material | Stainless steel |
Rod length | 500 mm |
EN standard | 795 |
Suitable for use in the following materials | Wood |
Type description | L3-HW-500-300 |
Height | 500 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Hexagonal bolt with threading up to head
Plastic frame anchor SHARK® UR F A4 stainless steel
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 A2 stainless steel
Mounting set For tubular frame fittings on a long plate
Knife blade Martor trapezoidal blade no. 52
Spring band clamp DIN 3021, shape B with handy clip, W.TEC
Adhesive base for cable ties, screw-on 25.4x25.4 mm – industrial quality
Safety boots, S2
4KS profile double cylinder
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain