Cross-shape floor marking
FLRMRK-CROSSSHAPE-RED
Art.-no. 0812449132
EAN 4062856710119
Register now and access more than 125,000 products
Orientation and conformity with standards
- Clear orientation in accordance with ASR A1.3.
- Meets the requirements of DIN EN ISO 7010.
- Sharp contours simplify orientation in the workplace and ensure a clear division of areas and routes in storage, logistics and production.
- Combines well with other floor markings from our assortment.
Shape and durability
- Rounded shape for high visibility and long-term use.
- Withstands light to medium stress and reduces replacement cycles.
PVC marking with acrylate adhesive
- Extremely durable when subject to day-to-day stress.
- High tear resistance for heavy-duty use.
- High abrasion resistance for long-term use and good durability.
- Easy to clean.
Easy installation
- Self-adhesive rear side for quick adhesion on clean surfaces.
- Quick to apply and can be walked on immediately.
- Quick and efficient application.
Compatible with a wide range of surfaces
- Can be used in production, storage and sales areas, as well as at workstations.
- Suitable for pedestrian and pallet truck traffic.
- For smooth, indoor surfaces.
- Can be used on level concrete screed, EP/PU/MMA coatings and tiles.
The floor marking may not be exposed to any high mechanical stress, in particular from heavy industrial trucks or from revolving movements or turning manoeuvres performed on the marking, as well as pallets being pulled or pushed across the marked surface.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
This self-adhesive cross-shape floor marking made of robust PVC is used for marking straight crossings and intersections on walkways and traffic routes, ensuring clear zoning, safe routing and clearly visible divisions between storage, logistics and production on smooth indoor flooring subject to light to medium traffic.
It is ideal for crossings on walkways and vehicle traffic routes, transitions and intersections between areas or teams and node marking in milk-run and tugger train routes, and also supports a standardised marking logic in combination with other floor markings.
The striking colour allows for quicker identification of relevant areas, reducing search times, minimising mispicking and increasing both safety and process reliability in intralogistics. The marking is designed for foot traffic and wheeled transport such as pallet trucks, roller containers and tugger trains.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces, particularly concrete and asphalt.
When peeling, do not touch the adhesive area and try to remove the protective film in one piece. Then immediately position the marking, stick it in place and press it down firmly. To ensure a particularly even finish, we recommend using a press-on roller.
Avoid air pockets and ensure correct positioning, as it will not be possible to remove it again, due to the high adhesive strength. The cross is at full strength immediately following application.
Adhesive base | Acrylate |
Material | PVC - Polyvinyl chloride |
Length | 150 mm |
Width | 150 mm |
Thickness | 0.5 mm |
Colour | Red |
Form | Cross |
Gloss level | Matt |
Suitable for use in the following materials | Smooth and crevice free |
Area of application | Indoors |
Min./max. temperature conditions | -20 to 70 °C |
Min./max. processing temperature | 12 to 40 °C |
Shelf life from production/conditions | Unlimited / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagonal bolt with half dog point and small hexagon DIN 564, blue passivated zinc plated 8.8 steel (A2K)
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, plain
Welding helmet SR 700/592 Sundström H06-4812
Low-cut safety shoes, SB Steitz VD 4062 ESD
Single-handed grease gun with variable pressure setting directly on handle
90° elbow, reduced, with female and male thread EN10242 A4 reduced, plain, malleable iron
2C repair filler RSM for all wood and imitation wood surfaces
Speed GaLa diamond cutting disc
Welding clamp for cordless clamp welding device