E30 fire protection duct
Fire protection duct E30
FPDCT-E-160X100-VZ-VE2/2M
Register now and access more than 125,000 products
- Easy installation
- Enormous time savings and weight reduction: The panels do not need to be bonded, clamped or screwed in. Instead, the individual panels can be installed loose or adjusted in the sheet-metal duct
- Easier to handle than conventional electrical ducts
- Installation by one person possible for all sizes
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-19-010
Datasheets(X)
- Can be used for indoor and outdoor applications thanks to long-term protection against rain, frost and UV radiation
- The duct can be easily opened and closed multiple times for inspections or subsequent installations without causing damage
- To be used in system [E4.1]
- E30-E90 electrical duct for ensuring functional integrity in accordance with DIN 4102 part 12
- Single-sided version and two-, three- and four-sided versions available
- Max. dimensions of E30: outer dimensions: W 640 x 260 mm and inner dimensions: W 520 x 180 mm
- Can be installed directly on walls or ceilings using ceiling hangers or brackets, or on or around cable trays
- The sheet-metal duct is available in zinc-plated steel or with a coloured coating
- Sheet-metal duct with a maximum length of up to 2.3 m enables quick and easy installation
- Spacing of supporting structure ≤ 1.25 m
- Ducts and moulded parts can be made with custom dimensions for project-specific applications
Width x height | 248 x 186 mm |
Length | 2000 mm |
Colour | Silver grey |
Width x height (internal dimension) | 160 x 100 mm |
Fire resistance rating | E30 |
Surface | Zinc plated |
Material | Sheet steel |
Last viewed
ORSY®BULL series 5 front loader box For system case
Jacket Planam MG 260
Twist drill bit HSCo DIN 338 type RN oxide
Metric double box-end wrench with POWERDRIV®
Drawer divider set, BASIC, 9 compartments
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Slotted cheese head DIN 84, steel 4.8, plain
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Brass mandrel
Work jacket