E30 fire protection duct
For detailed information, other images and documents, please select individual articles from the following table.
E30 fire protection duct
E30 electrical duct for ensuring functional integrity in accordance with DIN 4102 part 12.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Easy installation.
- Significantly faster and more lightweight: The panels do not need to be bonded, clamped or screwed in. Instead, the individual panels can be installed loose or adjusted in the sheet metal duct.
- Easier to handle than conventional electrical ducts.
- All sizes can be installed by one person.
Notice
The installation instructions and test certificate no. P-MPA-E-19-010 must be strictly observed when installing the fire protection duct.
Application area
- Suitable for indoor and outdoor use. The duct can also be manufactured in a stainless steel variant for direct weathering. Protection against rain, frost and UV radiation.
- The duct can be easily opened and closed multiple times for inspections or subsequent cable routing without causing damage.
Instructions
- For use in system [E4.1]
- E30-E90 electrical duct for functional integrity in accordance with DIN 4102 Part 12
- Custom configuration of 2, 3 and 4-sided versions available.
- Max. dimensions of E30: outer dimensions: W 640 x 260 mm and inner dimensions: W 520 x 180 mm.
- Install on a wall or ceiling using a console or rail system.
- The sheet metal duct is available in zinc plated steel or with a colour coating.
- Sheet metal duct with a maximum length of 2.3 m for quick and easy installation.
- Spacing for supporting structure ≤ 1.25 m.
- Ducts and moulded parts can be produced in custom dimensions for specific projects.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!