Fire protection duct I30/I60/I90/I120

Name: Fire protection duct I30/I60/I90/I120
Brand: Würth
SKU: 0973997003

Fire protection duct I30/I60/I90/I120
FPDCT-I-260X100-PU2/2M

Art.-no. 0973997003

EAN 4049557682068

All versions

Specification

Metal fire protection duct for encapsulation of fire loads with active fire retardation

No propagation of fire in the duct; actively inhibits fire

Low space requirements as virtually the entire duct cross-section is usable

Fast, simple installation; easily mountable, self-closing components

Dust-free installation

Simple fastening, even directly on ceilings or walls

Easily accessible, therefore maintenance-friendly; easy and simple to add to installation at a later stage

Cable versions available with metal or plastic cable fittings in accordance with EN 60 423

Dimensionally stable

Special designs also deliverable via special order: Two-sided, three-sided, four-sided, round duct, stainless steel duct, surfaces in RAL colours

Fire resistance rating I 30 to I 120

Interior coating begins to react at +200°C

Low tare weight

Notice

Where cables and pipes are directly supported, the permissible total weight resulting from cable and pipe dead weight is ≤ 34 kg/m

Store in a dry and frost-free place

When installing the fire protection duct, closely observe the installation instructions and approval Z-19.30-2214

DIBt National technical approval Z-19.30-2214

Application

Application area

For use in system E4

Fire protection duct I 30/I 60/I 90/I 120 for encapsulation of combustibles

Escape and rescue routes, as well as in essential corridors and stairwells

Suitable for cables, flammable pipes and non-flammable pipes with flammable synthetic rubber insulation

The I-duct can be routed through fire-resistant solid and lightweight partition walls

Duct itself can act as a cable conduit

Instructions

The installation instructions and general type approval Z-19.30-2214 must be strictly observed when installing the fire protection duct.

Technical information

Width x height	260 x 100 mm
Length	2000 mm
Colour	Silver grey
Fire resistance rating	I30, I60, I90, I120
Surface	Zinc plated
Material	Steel / steel

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Assembly set For I30/I60/I90/I120 fire protection duct

ASMBY-SET-F.FPDCT-I-3PCS

Art.-no. 0973997069

For encapsulation of fire loads with active fire retardation

x 1 pcs

Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel

RIV-ISO15979-ST/ST-A2K-(0,5-3,0)-3,2X6,0

Art.-no. 09352326

Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive

SCR-PANHD-DIN7981-F-H2-(A2K)-4,2X9,5

Art.-no. 0115104295

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU

Fire protection duct cable version I30/I60/I90/I120

CBLOUTL-FP-F.FPDCT-I-50X50MM

Art.-no. 0973997061

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct bracket, coated I30/I60/I90/I120

BRKT-FP-F.FPDCT-I-1000X50X30MM

Art.-no. 0973997065

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct connection rail I30/I60/I90/I120

CONRL-FP-F.FPDCT-I-1000X80MM

Art.-no. 0973997066

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct end cap I30/I60/I90/I120 To be used in E4 system

ENDCAP-FP-F.FPDCT-I-260X100MM

Art.-no. 0973997073

End cap for metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire partition marking plate for cables and electrical lines

MRKPLT-PIPE-CBL

Art.-no. 0893310005

x 20 pcs

Fire-retardant divider

DIVIDR-(F.FPDCT-I)-50MM

Art.-no. 0973997062

Divider for the I duct

x 5 pcs

Fire-retardant divider

DIVIDR-(F.FPDCT-I)-100MM

Art.-no. 0973997063

Divider for the I duct

x 5 pcs

Fire-retardant divider

DIVIDR-(F.DCTFP-I)-120MM

Art.-no. 0973997064

Divider for the I duct

x 5 pcs

Fire protection duct end cap I30/I60/I90/I120 To be used in E4 system

ENDCAP-FP-F.FPDCT-I-80X50MM

Art.-no. 0973997071

End cap for metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct end cap I30/I60/I90/I120 To be used in E4 system

ENDCAP-FP-F.FPDCT-I-200X50MM

Art.-no. 0973997072

End cap for metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct end cap I30/I60/I90/I120 To be used in E4 system

ENDCAP-FP-F.FPDCT-I-400X120MM

Art.-no. 0973997074

End cap for metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct end cap I30/I60/I90/I120 To be used in E4 system

ENDCAP-FP-F.FPDCT-I-30X30MM

Art.-no. 0973997078

End cap for metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct end cap I30/I60/I90/I120 To be used in E4 system

ENDCAP-FP-F.FPDCT-I-40X40MM

Art.-no. 0973997079

End cap for metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct wall connection collar I30/I60/I90/I120

WLCONCOLAR-F.FPDCT-I-80X50MM

Art.-no. 0973997081

Wall connection collar for fire protection I-duct for encapsulation of combustibles with active fire suppression

x 1 pcs

Fire protection duct wall connection collar I30/I60/I90/I120

WLCONCOLAR-F.FPDCT-I-200X50MM

Art.-no. 0973997082

Wall connection collar for fire protection I-duct for encapsulation of combustibles with active fire suppression

x 1 pcs

Fire protection duct wall connection collar I30/I60/I90/I120

WLCONCOLAR-F.FPDCT-I-260X100MM

Art.-no. 0973997083

Wall connection collar for fire protection I-duct for encapsulation of combustibles with active fire suppression

x 1 pcs

Fire protection duct wall connection collar I30/I60/I90/I120

WLCONCOLAR-F.FPDCT-I-400X120MM

Art.-no. 0973997084

Wall connection collar for fire protection I-duct for encapsulation of combustibles with active fire suppression

x 1 pcs

Fire protection duct flat square I30/I60/I90/I120

FLSQUAR-FP-F.FPDCT-I-80X50MM

Art.-no. 0973997111

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct flat square I30/I60/I90/I120

FLSQUAR-FP-F.FPDCT-I-200X50MM

Art.-no. 0973997112

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct flat square I30/I60/I90/I120

FLSQUAR-FP-F.FPDCT-I-260X100MM

Art.-no. 0973997113

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct flat square I30/I60/I90/I120

FLSQUAR-FP-F.FPDCT-I-400X120MM

Art.-no. 0973997114

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct T-piece I30/I60/I90/I120

T-PCE-F.FPDCT-I-80X50MM

Art.-no. 0973997121

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct T-piece I30/I60/I90/I120

T-PCE-F.FPDCT-I-200X50MM

Art.-no. 0973997122

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct T-piece I30/I60/I90/I120

T-PCE-F.FPDCT-I-260X100MM

Art.-no. 0973997123

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct T-piece I30/I60/I90/I120

T-PCE-F.FPDCT-I-400X120MM

Art.-no. 0973997124

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct T-piece I30/I60/I90/I120

T-PCE-F.FPDCT-I-30X30MM

Art.-no. 0973997128

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct T-piece I30/I60/I90/I120

T-PCE-F.FPDCT-I-40X40MM

Art.-no. 0973997129

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct inner corner I30/I60/I90/I120

INCRN-FP-F.FPDCT-I-80X50MM

Art.-no. 0973997131

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct inner corner I30/I60/I90/I120

INCRN-FP-F.FPDCT-I-200X50MM

Art.-no. 0973997132

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct inner corner I30/I60/I90/I120

INCRN-FP-F.FPDCT-I-260X100MM

Art.-no. 0973997133

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct inner corner I30/I60/I90/I120

INCRN-FP-F.FPDCT-I-400X120MM

Art.-no. 0973997134

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct inner corner I30/I60/I90/I120

INCRN-FP-F.FPDCT-I-30X30MM

Art.-no. 0973997138

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct inner corner I30/I60/I90/I120

INCRN-FP-F.FPDCT-I-40X40MM

Art.-no. 0973997139

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Cable bracket for overhead mounting

CBLBRKT-F.DCTFP-I-80X50

Art.-no. 0973997140

Use in E4 fire protection duct system

x 24 pcs

Cable bracket for overhead mounting

CBLBRKT-F.DCTFP-I-200X50

Art.-no. 0973997141

Use in E4 fire protection duct system

x 24 pcs

Earthing clip

DCTERTHCLIP-F.DCTFP-I

Art.-no. 0973997146

Use in E4 fire protection duct system for potential equalisation in I-duct or E-duct

x 25 pcs

Fire protection duct outer corner I30/I60/I90/I120

EXCRN-FP-F.FPDCT-I-80X50MM

Art.-no. 0973997151

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct outer corner I30/I60/I90/I120

EXCRN-FP-F.FPDCT-I-200X50MM

Art.-no. 0973997152

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct outer corner I30/I60/I90/I120

EXCRN-FP-F.FPDCT-I-260X100MM

Art.-no. 0973997153

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct outer corner I30/I60/I90/I120

EXCRN-FP-F.FPDCT-I-400X120MM

Art.-no. 0973997154

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

Fire protection duct outer corner I30/I60/I90/I120

EXCRN-FP-F.FPDCT-I-30X30MM

Art.-no. 0973997158

Metal fire protection duct for encapsulation of fire loads with active fire retardation

x 1 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Last viewed

Hexagonal bolt with thread up to the head ISO 4017, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)

Roller unit plastic R9

Corvus suede S3 safety boots

Colour – blind rivets Round pan head

Safety glasses

Designer furniture handle D handle, antique

Pipe linch pin

Ring bolt H.T.

Cetus softshell jacket

Professional boltless rack

Fire protection duct I30/I60/I90/I120

Specification

Application

Technical information

Documents

Accessory

Last viewed

For the best WÜRTH experience