Fire protection duct I30/I60/I90/I120
For detailed information, other images and documents, please select individual articles from the following table.
Fire protection duct I30/I60/I90/I120
Metal fire protection duct for encapsulating fire loads with active fire prevention.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Fire cannot spread through the duct; actively contains the fire.
- Low space requirements as almost the entire duct cross-section can be used.
- Quick and easy installation with easily mountable, self-closing components.
- Dust-free installation.
- Easy to secure and can be fixed directly to walls and ceilings.
- Easy to access for simple maintenance and quick and easy retrofitting.
- Suitable for cables with metal or plastic cable glands in accordance with EN 60 423.
- Dimensionally stable
- Special designs also deliverable via special order: 2-sided, 3-sided and 4-sided versions, round ducts, stainless steel ducts and surfaces in RAL colours.
- Fire resistance period I 30 to I 120.
- Inner coating starts to react at +200 °C.
- Low dead load.
Notice
- Where cables and pipes are directly supported, the permissible total weight resulting from cable and pipe dead weight is ≤ 34 kg/m.
- Store in a dry and frost-free location.
- When installing the fire protection duct, closely observe the installation instructions and approval Z-19.30-2214.
DIBt National technical approval Z-19.30-2214
Application area
For use in system E4
Fire protection duct I 30/I 60/I 90/I 120 for encapsulation of combustibles
- In escape and rescue routes, necessary corridors and stairwells.
- Suitable for cables and combustible/non-combustible pipes with combustible synthetic rubber insulation.
- The I-duct can be routed through fire-resistant solid and lightweight partition walls.
- The duct itself can be used as a cable tray.
Instructions
The installation instructions and general type approval Z-19.30-2214 must be strictly observed when installing the fire protection duct.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!