Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
WSH-ISO7090-200HV-(HDG)-30
Register now and access more than 125,000 products
- Replaces DIN 125.
- Washers with hardness class 200 HV are suitable for use in combination with screws in strength classes ≤ 8.8 and nuts in strength classes ≤ 8.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M30 |
Internal diameter (d1) | 31 mm |
Outer diameter (d2) | 56 mm |
Thickness (h1) | 4.000 mm |
Standards | ISO 7090 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Last viewed
Cover caps for cam lock nut 22
CRAFT mobile drawer cabinet
Snap ring for bore holes DIN 9928, steel plain
Partition assortment
Rubber modules, small
Fire-retardant filling block for Combi fire protection foam
Stand-off installation system AMO-Max spacer washer
MM 300 POWER MIG/MAG welding system
Screw with flattened half round head with hexagon socket, imperial ASME B18.3, plain 18-8 stainless steel, UNF (fine thread)
Pan Head screw with hexalobular head ISO 14583, steel 8.8, zinc-plated, blue passivated (A2K)