Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M6-25SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 25 mm² |
Flange hole | M6 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 6.4 mm |
Distance between sleeve end and centre of hole (e) | 30 mm |
Sleeve length (a) | 15 mm |
Width (b) | 14 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagon screw, type S/A4 — push-through installation DIN 933 A4 stainless steel, with washer, in accordance with DIN EN ISO 7089 (DIN 125), A4 stainless steel
Slotted set screw with tip DIN 553, A4 stainless steel, plain
Hexagonal bolt
Wing screw, square wings Similar to DIN 316, A4 stainless steel, plain, pressed
Nova Pro Scala Crystal Plus H186 frame
Work trousers
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A2-70 stainless steel, plain, with nut ISO 4032
Hexagonal bolt with shank
Threaded rod DIN 976, A2-70 stainless steel, shape A
Jacket Planam Highline