For detailed information, other images and documents, please select individual articles from the following table.
AMO-Therm Mini stand-off installation system set 126 pcs
Set consisting of AMO Therm Mini system elements and the required installation tool in a well-organised case. Guarantees high-quality installation
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
This set covers a wide range of applications
- A single screw length can be used for a wide range of fastening situations: deeper insertion in small insulation thicknesses, lower embedment depths with thicker insulation.
- For insulation thicknesses ranging from 60 mm to 200 mm.
- Moulded M8/M10 adapter.
- Down pipe mounting with M10x45 threaded stud in A2 in combination with collar art. no. 090350099 and sealing washer art. no. 0903500990.
- ASSY-D 3.5 to 5 with additional insert in the adapter.
For installation in concrete and masonry without the formation of thermal bridges
Fill the ring gap between the insulation and the adapter with a suitable sealant. We recommend window and façade sealant art. no. 0892320010
Spacer installation system AMO®-Therm Mini: Downpipe attachment in masonry
Spacer installation system AMO®-Therm Mini: Downpipe attachment in concrete
Mount the countersink on the drill bit
Observe the marking
Drilling core hole and countersink in one step. The generally required drilling depth of 288 mm is achieved when the end of the countersink is flush with the surface of the wall plaster
Remove drill cuttings from drill hole
The adapter offers an M8/M10 combination connection.
The two half-shells are clipped together centrally over the screw shaft using combination pliers. As a precaution, use the combination pliers to press the adapter together at the top and bottom. The adapter does not sit tightly around the screw head, both elements can be rotated separately
The drive is reached with a 70-mm bit, the screw is screwed into the base material flush with the surface (plaster or insulation). The adapter is then adjusted with a 1-mm protrusion. As soon as the outer bars of the adapter are able to engage in the insulation, the adapter no longer turns with the rest of the unit
Fill the ring gap with window and façade sealant
Installation of downpipe clamp: Screw threaded rod M10 flush into the adapter
Remove the adhesive film from the sealing washer and push over the threaded rod flush to the surface with the adhesive coating facing up
Screw on the collar flush
Screw on the downpipe clamp
Installing M10/M8: The attachment is fastened with a suitable screw
Screw in screw until flush
The supplied insert is screwed into the M10 thread, thus creating a mounting option for an ASSY-D® screw ∅ 4-5
Screw in screw until flush
For securing light to medium loads (letterboxes, lamps, surveillance cameras or guttering down pipes (anchors in a redundant non-structural system)) in insulated façades with or without plaster
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!