For detailed information, other images and documents, please select individual articles from the following table.
Floor marking dots on roll
Using the application film, the self-adhesive PVC marking dots can be applied quickly, cleanly, and in a time- and cost-saving manner, enabling efficient line marking in warehousing, logistics and production.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Efficient, standardised line marking
- Clear, visible marking without time-consuming measuring.
- Pre-perforated roll with dia. 50 mm dots and 130 mm spacing for reproducible marking patterns.
- Reduces search times and helps avoid picking errors.
- Can be walked on and driven over immediately and minimises operational interruptions.
Quick, clean bonding
- For even, orderly application even over longer distances.
- Easy to use due to application film.
- Saves time and costs during application.
- Quick replacement of individual dots in the event of damage.
- Avoids time-consuming repairs to the full marking run.
- Quick installation without tools.
PVC marking with acrylate adhesive
- Extremely durable when subject to day-to-day stress.
- High tear resistance for heavy-duty use.
- High abrasion resistance for long-term use and good durability.
- Easy to clean.
Broad substrate compatibility
- Can be walked on by pedestrians and driven over by pallet trucks.
- For smooth indoor surfaces.
- Can be used on smooth concrete screed, EP/PU/MMA coatings and tiles.
The floor marking may not be exposed to any high mechanical stress, in particular from heavy industrial trucks or from revolving movements or turning manoeuvres performed on the marking, as well as pallets being pulled or pushed across the marked surface.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of possible applications and different storage and use conditions, we do not assume any liability for a specific application result.
We do not assume any liability for any technical information or advice provided by our free customer service, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We are committed to maintaining the quality of our products and reserve the right to make technical changes and further developments to our products.
Self-adhesive PVC marking dots allow fast, precise and uniform line marking in warehousing, production and logistics, without the need for time-consuming measuring. Can be driven over and walked on immediately and designed for medium loads.
Typical applications include bay marking (e.g. pallet bays, picking zones and staging areas), route marking and material-flow control (pedestrian and transport routes, one-way systems), safety marking (restricted areas, safety distances, warning and protection zones), zone marking in production and assembly (work areas, buffer zones, transfer points), and lean/5S marking for order and standardisation on the shop floor.
For optimal adhesion, the substrate must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces, particularly concrete and asphalt.
Simply unroll the tape and stick the dots section by section in the desired position. Then peel off the liner/application film and press down firmly on each dot. A press-on roller is ideal for this.
Marking dots can be individually removed in case of damage. The use of Industry Cleaner is recommended for clean, residue-free removal of any remaining adhesive.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!