For detailed information, other images and documents, please select individual articles from the following table.
Arrow-shaped floor marking
The arrow-shaped robust PVC self-adhesive floor marking is suitable for clearly marking movement directions, routes and traffic areas in warehousing, logistics, production, sales areas and workshops.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Clear navigation
- In accordance with ASR A1.3.
- Unambiguously marks paths and travel directions.
- Highly visible colours aid quick navigation even in dim light.
- Meets the requirements of DIN EN ISO 7010.
PVC marking with acrylate adhesive
- Extremely durable for daily use.
- Robust and highly resistant to tearing.
- High abrasion resistance for resilience over long-term use.
- Easy to clean.
Easy installation
- Self-adhesive rear for quick adhesion to clean substrates.
- Easy to apply, can be walked on immediately.
- Simple and time-saving to apply.
Broad substrate compatibility
- Can be used in production, storage and sales areas or at workstations.
- Suitable for pedestrians and pallet jacks.
- For smooth indoor surfaces.
- Can be used on smooth concrete screed, EP/PU/MMA coatings and tiles.
This type of floor marking must not be subjected to high mechanical loads, in particular from heavy industrial trucks, turning or pivoting manoeuvres on the marking, or from dragging or pushing pallets across the marked area.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
The marking is suitable for low to moderate loading. It is designed for pedestrian areas and rolling transport equipment such as pallet jacks, roll containers and tugger trains.
It also supports 5S and lean applications such as one-way systems, standardised movement directions, material flow and replenishment along milk-run and kanban routes to handover, packing and entrance areas.
In addition to production, warehousing and logistics, typical areas of use include workshops, supermarkets, gyms, hotels, restaurants and filling stations, as floor markings there improve navigation, make it easier to communicate routes and distances and make exits, escape routes and rescue routes quicker and easier to find.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces - particularly concrete and asphalt.
When peeling, do not touch the adhesive area and try to remove the protective film in one piece. Immediately position and stick the marking in place. Press firmly. We recommend a pressure roller for a particularly uniform finish.
Avoid air pockets and ensure correct positioning, as it will not be possible to remove again due to the high adhesive force. The arrow shape can be fully loaded immediately after application.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!