For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
The hold-closed system also lets you tension the band against the running direction. If the belt becomes clogged in one running direction, it is possible to turn it around.
Suitable for the PROFIT power tool by Lägler.
Levelling old and warped flooring, as well as newly installed floors; sanding old parquet floors; sanding and fine sanding of newly installed parquet floors; sanding cork floors
Floor sanding instructions
1. Pre-sanding
Levelling of the laid wooden floor normally occurs in the first sanding stages. In this case, the floor is pretreated with a relatively coarse-grained sanding material and sanded thoroughly.
Caution: Unevenness in the sub-floor can only partially be removed by sanding.
2. Intermediate sanding
Intermediate sanding leads to refinement of the surface. The more precise the co-ordination of the sanding stages and the finer the sanding, the more attractive the surface will be. Parts of the floor must be plugged up after intermediate sanding.
3. Fine sanding
Before the floor is treated with waxes, glazes or sealants, the final stage of sanding takes place: fine sanding. Take the following general considerations into account: The more precise the co-ordination of the sanding stages and the finer the sanding, the better the surface will be.
In general, there are no rules governing the sanding of wooden floors in terms of which grain to use. It always depends on the floor.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!