For detailed information, other images and documents, please select individual articles from the following table.
BASIC floor marking strip
The self-adhesive strip-shaped floor marking is suitable for smooth indoor floors under medium load and is used to mark parking spaces, routes and zones in warehousing, logistics and production for safe, durable orientation.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Navigation and standards compliance
- Clear navigation in accordance with ASR A1.3.
- Meets the requirements of DIN EN ISO 7010.
- Clear edges aid navigation at the workplace and unambiguously define areas and paths in storage, logistics and production.
- Combines well with other types of floor marking from our range.
PVC marking with acrylate adhesive
- Extremely durable for daily use.
- Robust and highly resistant to tearing.
- High abrasion resistance for resilience over long-term use.
- Easy to clean.
Easy installation
- Self-adhesive rear for quick adhesion to clean substrates.
- Quick to apply and to replace.
- Can be walked on immediately.
- Simple and time-saving to apply.
Broad substrate compatibility
- Can be used in production, storage and sales areas or at workstations.
- Suitable for pedestrians and pallet jacks.
- For smooth indoor surfaces.
- Can be used on smooth concrete screed, EP/PU/MMA coatings and tiles.
This type of floor marking must not be subjected to high mechanical loads, in particular from heavy industrial trucks, turning or pivoting manoeuvres on the marking, or from dragging or pushing pallets across the marked area.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
The strip-shaped floor marking is ideal for clear marking of parking and set-down areas, for example for trolleys, containers, machines and test devices, as well as for defining fixed set-down positions at workbenches, assembly stations and workstations. At the same time, routes, handover and buffer zones, and safety and clearance areas can be clearly marked. This is particularly useful where markings need to be continuous, consistent and easy to follow.
On smooth indoor floors, it is designed for pedestrian areas and rolling transport equipment such as pallet jacks, roll containers and tugger trains under light to medium loads.
Multiple colour options and good visibility support standardised marking logic for 5S and lean management; the strips can also be ideally combined with other floor marking types.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. On certain surfaces, the use of a butyl primer is also recommended - especially on concrete and asphalt.
When peeling, do not touch the adhesive area and try to remove the protective film in one piece. Then immediately position the marking, stick it in place and press it down firmly. To ensure a particularly even finish, we recommend using a press-on roller.
Marking strips can be individually replaced in case of damage. The use of Industry Cleaner is recommended for clean, residue-free removal of any remaining adhesive.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!