Sandpaper disc Klingspor PS 21 FK
Sandpaper disc Klingspor PS 21 FK
PAPSNDD-KLINGSPOR-237224-D115-G40
Register now and access more than 125,000 products
The high-quality sanding disc is used on hand-held machines. Thanks to its hook-and-loop backing, it can be easily attached to standard hook-and-loop fastener backing pads.
The design of the PS 21 FK sanding disc is precisely adapted to coarse to finish sanding of stainless steel. Its backing, made of sturdy F-paper, is resilient and offers high edge strength. The self-sharpening, tough zirconia alumina is densely scattered and fixed with a synthetic resin bond. The PS 21 FK from Klingspor demonstrates a very aggressive sanding behaviour with a high, even removal rate and a long service life.
Datasheets(X)
Form | Washer |
Diameter (Ø) | 115 mm |
Grid size | 40 |
Hole pattern | Unpunched |
Adhesive system | Hook and loop |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Flat washer For hexagon head bolts and nuts DIN 125, A4 stainless steel
Cover plate DIN 3015-2, double version (DP-S), W.TEC series
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Reserve taper grooved dowel pin ISO 8741 steel plain
Ladies’ cargo trousers
Split pin ISO/WN 1234 steel zinc-plated
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
EPS profile thumbturn cylinder
Threaded fitting
HSCo blue-ring machine tap for blind holes DIN 371/376