Spacer installation system AMO®-Therm Mini set 126 pcs
AMO-Therm Mini set 126 pcs
AMOTHERM-MINI-SORT-126PCS
Art.-no.
5964591300
EAN 4065746288682
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Set consisting of AMO® Therm Mini system elements and the required assembly tool in a well-organised case. Guarantees high-quality assembly
This set covers a wide range of applications
- A single screw length can be used for a wide range of fastening situations - deeper screwing in small insulation thicknesses, lower setting depths with thicker insulation
- For insulation thicknesses ranging from 60 to 200 mm
- Shaped connecting thread M8 and M10
- Down pipe mounting with threaded fitting M10x45 in A2 in combination with collar art. no. 090350099 and sealing washer art. no. 0903500990
- ASSY-D 3.5-5 with additional insert in the adapter
For installation in concrete and masonry without the formation of thermal bridges
Notice
Fill the ring gap between the insulation and the adapter with a suitable sealant. We recommend window and façade sealant art. no. 0892320010
Application area
For securing light to medium loads (letterboxes, lamps, surveillance cameras or guttering down pipes (anchors in a redundant non-structural system)) in insulated façades with or without plaster
 | |
System dimensions | 8.4.1 |
Number of pieces in assortment/set | 126 PCS |
| Transverse tensile load in conjunction with M8 and M10 connection elements or with ASSY D 5 plug screw* | ||
| Transverse tensile capacity | Vrec. | |
| [kN] | ||
| All insulation thicknesses and surfaces | 0,2 | |
| Assembly parameters of fasteners in the adapter | ||
| Type of fastener | Max. tightening torque Mrec. [Nm] | Length of thread engagement [mm] |
| M8 | 2,5 | 20-24 |
| M10 | 3,5 | 8-12 |
| ASSY-D 4* | 0,7 | 18-24 |
| ASSY-D 5* | 1 | |
| * with insert in adapter | ||
| Legend of AMO-Therm Mini installation situation | |
| hmin | Minimum component thickness |
| dmw | Bore diameter, masonry |
| db | Bore diameter, concrete |
| dp | Bore diameter, plaster |
| tD | Min. bore depth (total) |
| hnom | Effective anchorage depth |
| e | Thickness of non-load-bearing layer (ttol + tinsulation + ü) |
| ü | Overhang ≥ 1 mm |
| ttol | Thickness of old plaster and/or adhesive |
| Recommended loads | |||
| Centric tensile load in conjunction with M8 and M10 fasteners in different surfaces | Centric tensile load in conjunction with ASSY-D plug screw* 4 to 5 mm in all surfaces | ||
| Tensile capacity | Nrec. | Tensile capacity | Nrec. |
| Surface | [kN] | [kN] | |
| Concrete C20/25 | 0,8 | All surfaces | 0,25 |
| Solid brick MZ 36 | 0,8 | ||
| Solid sand-lime brick KSV 12 | 0,8 | ||
| Vertically perforated brick HLZ 12 | 0,3 | ||
| Hollow sand-lime brick KSL 12 | 0,8 | ||
| Aerated concrete PB 4 | 0,6 | ||
| Assembly parameters | |
| Nominal bore diameter in masonry dmw | 10 mm |
| Nominal bore diameter in concrete db | 7/16 inch |
| Min. drill hole depth (surface + insulation + plaster) tD | 288 mm |
| Insulation thickness (mm) | Effective anchorage depth in surface hnom (mm) |
| 60 | 218 |
| 80 | 198 |
| 100 | 178 |
| 120 | 158 |
| 140 | 138 |
| 160 | 118 |
| 180 | 98 |
| 200 | 78 |
Product information
Datasheets (0)
Certificates/ Documents (0)
Spacer installation system AMO®-Therm Mini set 126 pcs including:
1
x
Drill bit countersink for AMO®-Therm Mini stand-off installation system
PUSHONCNTSNK-AMOTHERM-MINI-DRLR-D10/16MM
ZEBRA
Description:
10 mm
For creating drill holes in conjunction with the suitable drill bit for the respective base material.
Quantity:
1
x
1
x
Description:
For gripping, holding and cutting soft and hard wires and cables
Quantity:
1
x
1
x
Description:
2.5 mm
Quantity:
1
x
20
x
Description:
For visually covering the insulation anchor SHARK® ISO 95 sets and the spacer installation system AMO®-Therm Mini
Quantity:
20
x
20
x
Description:
Self-adhesive sealing washer for collar for mounting downpipes
Quantity:
20
x
20
x
Threaded rod DIN 976, A2-70 stainless steel, shape A
THRPCE-DIN976-A-A2/70-M10X45
Quantity:
20
x
1
x
Description:
500 x 380 x 85 mm
Ideal for flexible storage of small parts, machines and tools used with consumables
Quantity:
1
x
4
x
Description:
A variable compartment for orderly storage and retrieval of various small parts. The system boxes can be combined individually with all system dividers.
Quantity:
4
x
8
x
System box separating element
PRTIONELMNT-F.SYSBOX-(BOX-H54)-H45-W70
SYSTEMKOFFER
Description:
For customising the division in system boxes
Quantity:
8
x
20
x
Adapter For AMO®-Therm Mini stand-off installation system
ADAPT-(AMOTHERM-MINI)-16X59-M8/M10+INRT
Description:
For anchor-less fastening of light to medium loads in insulated façades with thermal break. Anchoring through the insulation in masonry
Quantity:
20
x
20
x
Screw For AMO®-Therm Mini stand-off installation system
SCR-(AMOTHERM-MINI)-R30-(A2K)-11,5X252
AMO
Description:
For anchor-less fastening of light to medium loads in insulated façades with thermal break. Anchoring through the insulation in masonry
Quantity:
20
x
1
x
Description:
RW30; Length: 50 mm
The perfect bit for the new generation of ASSY screws
Quantity:
1
x
1
x
Description:
Length: 350 mm; Diameter: 10 mm
Drills through virtually any material
Quantity:
1
x
1
x
Plus Quadro-L Vario hammer drill bit
DRL-HAM-PLUS-Q-L-D7/16IN-L350-WL290MM
ZEBRA
Description:
The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement
Quantity:
1
x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Last viewed
Clamping pin/clamping sleeve ISO 13337 spring steel plain
ABS Lock FALZ III
C 6.3 PH bit (1/4 inch)
Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352 left-hand thread
Washer, square DIN 436, A4 stainless steel, plain
C 6.3 TX bit (1/4 inch)
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Hexalobular-socket cylinder head screw, low head
Exchangeable chuck For cordless hammer drill H 28-MAS
Flanged aluminium single ladder with steps
